Search This Blog

Labels

Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Tuesday, May 26, 2020

Geometric Cross Wall Art

Hey, friends!

You may or may not know, but our family lives in Slovenia to help the local Pentecostal churches - specifically in Ptuj at the moment.
The pastor of the church asked my husband and I to help them make the kids' Sunday school room more kid-friendly, and we were thrilled to do so!


As any self-respecting person living in 2020, I began my search on Pinterest. I didn't know exactly what I wanted, but I did know that I wanted something that was somehow modern and timeless at the same time. I found this great idea and saved it, but unfortunately by the time we went to paint it this past weekend the link was dead. 

So, I decided to put my own tutorial out there, in case someone found themselves in the same boat.

Tools:
- Paint brushes in different sizes (we didn't end up needing any big ones, as our triangle shapes were small.)
- 11 different colors of wall paint (you don't have to copy our colors exactly of course, just try to keep all of your colors in harmony with one another. We ended up with lots of jewel tones, and I love it!) You won't need a lot of each color, so you can buy the smallest paint bucket size they offer.
- Painter's tape - a small size. Ours was about an inch in width.
- Measuring tape.
- A level.
- Drop cloth.

Steps:
1. If you want an accent wall, start with that. We didn't paint the accent wall in this room, so I won't be giving steps on that. :)

2. The first thing you are going to want to do, is put down your drop cloth. I'm pretty klutzy, so this is especially important for me, ha!

3. Next, you will measure out the cross. You can make it any size you want to fit your wall, but these are the measurements we used: 


We measured outside of tape to outside of tape. You will need to use the level to make sure your lines are straight up and down, or horizontally. (This was especially hard, because the wall itself wasn't straight everywhere.) We started with the line on the very bottom. We knew we wanted the outlet to be part of the white cross so we wouldn't have to paint it. We chose a length we liked, and stuck painter's tape on the wall for that length. Next we measured up 130 cm, made a little mark on the wall with a pencil, then slid the level up the wall as we taped. We did the same on the other side, but were able to have a more accurate "point" made with the pencil, as we could measure side-to-side as well as top-to-bottom. We continued this until the whole cross was measured and taped out. Honestly, this was one of the hardest parts, as we started with no frame of reference. It took about an hour just for the cross.


4. Now for the fun part! Taking the painter's tape, we taped strips of it all over the wall to create mostly triangles, but all sorts of geometric shapes, in different sizes. We wanted connecting shapesn all around the cross, with it tapering off on the right. So, at first they're only separated by the tape, then there are some bigger stand-alone triangles, and finally some small ones.




5. After it's all done, make sure you go over all of it one last time, pressing your fingers or fingernail over it to really "seal" it, otherwise the paint will bleed.

6. And now the painting. (Shake paint VERY well before use.) We decided to go one color at a time once, then going over a second time to fill in any gaps. It was hard to gauge how many of each color to paint, and we definitely could have painted more the first time around, but this worked well, too. Our one rule was that a same color could not be touching itself. Also, we tried to visually space them out as well as we could. 

Tips: 
- Make sure your brush isn't "drippy", as you can easily drip paint on the color below where you are working. We speak from experience.
- The darker colors will need an extra coat or two.
- It is VERY easy to paint past the painter's tape because it is thinner than people usually work with, so paint with care.
- Make sure you paint all the way into the corners so they will look nice and crisp.





7. Apparently the best time to remove painter's tape is once the paint is dry to the touch so that it won't adhere to the tape. We didn't know this, and even if we had, we started removing tape as soon as we were done painting, but some of our darker paint colors came off with the tape. AAAAHHH! 
So, here are some tips:
- Be careful in pulling up the tape When you come to an "intersection" of tape, remove each one individually. 
- It's okay if you need to go back over some of the shapes to fix them. Just tape that part again, paint, and remove the tape once it is dry to the touch.

8. Once all the tape is removed, stand back and admire the result of your hard work!








And there is is! 
I hope that this wall is loved for many years.

Have you ever painted any sort of wall art or mural? How did it go? Was it a bigger task than you initially thought, lol?

Tuesday, April 16, 2019

DIY Felt Bowtie and Hairband

Yes. 
I'm gonna be that mom that makes my kids match sometimes.  


I feel like it's even more fun with a girl and a boy, because you have to get creative. Easter is the perfect time to flex my crafting muscles, and this week I was working on matching bowties and hairbands - so here we go!

What you'll need:
- Two colors of felt
- Hot glue gun
- Tape measure
- Scissors
- Needle 
- Thread 
- Button

Hairband


1. Cut a 2.5 cm segment of panty hose, and pull slightly to make a hairband.

2. Cut pieces of felt to the sizes given in the photo.


3. Fold the widest piece of felt, fold it in half, to find the middle seam.

4. Using a glue gun, glue the two cut edges to the middle "seam".

5. On the longer piece, create two pointed, "ribbon" endings.




6. Using a glue gun, glue the two pieces together as shown in the picture.




7. Using a glue gun, glue the two of them in the middle, and a little bit in the two other places there is a fold when creating an accordion.


8. Glue what you have of the bow so far onto the hairband.


9. Take the thinner, contrasting piece, and gluing as you go, secure the ribbon to the hairband once around, cutting off the excess.




Bowtie


1. Cut the pieces of felt according to the picture.


2. Follow the same method to create the initial bow part as above.





3. Glue the bow in the middle, once again creating and accordion.
 



4. Starting at the middle of the bow, glue the two long pieces of felt to the side you deem as the "back".


5. Take the shorter thin felt piece, and starting from the back, wrap it around the center, gluing as you go.  Cut off excess.


6. (The measurements of this part will vary according to the size of your child, but I will give what I used for mu 5-year-old.)
When measured from the middle of the bow, at the 17 cm mark of the strap, sew on a button.  On the other side, cut a slight slit as a button hole.  (If you'd like to avoid it loosening with wear, you can sew around the edges of the slit.)  Cut off excess.




And there you have it!

Honestly, trying to get a picture of my kids wearing them took longer than making them! Here are the best attempts...










Wednesday, March 6, 2019

DIY LEGO Mini Figure Display

About a month ago, my husband made our son the coolest LEGO table for his birthday.  We completed the look with a LEGO mini figure display.  Today, I have the instructions for you!



What you'll need:
- mini figures (at least 12)
- hot glue gun and sticks
- ruler (with centimeters)
9x9 RIBBA frame (one for every 12 figures you want to display)
- spray paint (we used black)
- 12 2x4 LEGO piece in color of your choice (you can buy loose bricks at your local LEGO store, or online - where you can basically find every brick, ever. Yay!)



Directions:

1. Take apart RIBBA frame, you can see all of the pieces.

2. Remove protective film on plastic insert.

3. Spray paint the pressed board piece on the side that does not have the hook for hanging.  Allow to fully dry.

4. Attach the mini figures you want to display to the 2x4 pieces.  Arrange them on the plastic insert at the intervals you would like. 


These are the measurements we chose (measuring INSIDE the frame):

- 1.5 centimeters from the edge
- 6.5 centimeters from the top of the frame to the bottom of the LEGO piece on the top row.
- 2 centimeters between each brick in a row (the bricks are 3 cm each, by the way)
- 6.8 centimeters between the bottom of one row to the bottom of the next
- 1.8 centimeters from the bottom of the last row of bricks to the edge of the frame.


5. Hot glue them in place.

6. Reassemble the frame, BUT put the spacer in first, then the plastic insert, then the backboard. (Essentially going from shadowbox to frame.)

7. Attach to wall, or set on shelf! Ta-da!!!


We really liked this, because it made it so that our son can take the mini figures off and play with them, but also have all of the ones that he's worked hard to collect out, so he can show them off!




And there you have it!  Your very own LEGO mini figure display instructions! :) Play on!